|
|
 |
|||||||||||||||||||||||||||||
| Gantner Home > Products > Q.series > Q.staxx |
Q.staxx Data Sheets & Manuals
Q.staxx Data Sheets
- Q.staxx Series
- Q.staxx A101 - Universal Module, 2 chl, 100KHz
- Q.staxx A103 - DC Input Module, 8 Channel, 100Hz
- Q.staxx A104 - TC Input Module, 8 Channel, 100Hz
- Q.staxx A107 - Universal DC Module, 4 chl, 10KHz
- Q.staxx A108 - DC Input Module, 8 Channel, 10KHz
- Q.staxx A109 - DC Output Module, 4 chl, 100KHz
- Q.staxx D101 - Multifunction Digital Module-8 in, 8 out
*Q.staxx specifications are the same as Q.bloxx
Q.staxx Manuals
Module Selection Guide
(Click to Enlarge)
...........................................................
Q.staxx - Robust Design for Pallet Handling Systems
In the Q.staxx packaging configuration, Q.bloxx modules are housed in sealed enclosures, mounted onto a passive back plane that is attached to the skid. Depending on the measurements desired, the modules can be interchanged onto the back plane, and the sensors are directly connected to the modules prior to the skid entering the test cell. In this approach a completely functional measurement system is configured, wired, and verified prior to entering the system into the test cell. Once in the cell, only a single connection to the automation system is required. The Q.staxx line is based on the Q-series, therefore the technical data for the Q.bloxx modules applies.
Q.staxx Modules
Q.staxx based on the Q.bloxx measuring and I/O module
technology. The technical data is therefore the same as the specifications given in the data sheets for the Q.bloxx modules. The Q.staxx units can be connected to a Q.gate or Q.pac test controller. Data is exchanged between the test controller and automation level via TCP/IP or using the EtherCAT or Profibus-DP fieldbus systems. Below is a break down of the Q.staxx modules:
| Product Model Number | Product Description |
|---|---|
| Q.staxx A101 | Q.staxx universal measuring module with 2 inputs, digital I/Os, 100 kHz per channel |
| Q.staxx A103 | Q.staxx voltage module with 8 inputs (BNC), 100 Hz per channel |
| Q.staxx A104 | Q.staxx thermocouple module with 8 inputs (MiniTCx), 100 Hz per channel |
| Q.staxx A107 | Q.staxx universal measuring module with 4 inputs (Binder connectors), 10 kHz per channel |
| Q.staxx A108 | Q.staxx voltage module with 8 inputs (BNC), 10 kHz per channel |
| Q.staxx A109 | Q.staxx voltage module with 4 analog outputs, V/I configurable, digital I/Os, 100 kHz per channel |
| Q.staxx D101 | Q.staxx digital measuring module with 8 digital inputs and 8 digital outputs, status, counter, frequency, PWM |
Important Features:
• Measuring and I/O modules for all common process signals |