Accessories - Making It Simpler

Converters

ISK 101

- Converter between PC and measurement modules (RS-232 to RS-485)
- Very compact (Standard DB09 plug)
- Automatic detection of the baud rate (Baud rate up to 38,400 Baud)
- Automatic direction detection (No handshake necessary)
- LED status display (Power, receive, and transmit)

 

 

ISK 200

- Converter between measurement modules - PC (RS-485 to RS-232
   and RS-485 to USB)
- Power supply for measurement modules (20 VDC for the voltage
   supply of up to 6 modules)
- Galvanic isolation up to 1.5 kV (Protection of measurement modules
   from damaging voltages)
- Automatic baud rate detection (Baud rate up to 115.2 kbps)
- LED status display (Power, receive, and transmit)

ISK 200 Manual

 

 

 

Q.bloxx Terminal Blocks

- Q.bloxx Terminal CJC 101 (Cold junction compensation for
   thermocouples - Q.bloxx A101)
- Q.bloxx Terminal CJC 104 (Cold junction compensation for
   thermocouples - Q.bloxx A104)
- Q.bloxx Terminal CJC 107 (Cold junction compensation for
   thermocouples - Q.bloxx A107)
- Q.bloxx Terminal B 1/4 (10-pole connector for 1/4 bridge to Q.bloxx
   A101, A102, and A106; 120 Ω completion resistance or 350 Ω
   completion resistance)
- Q.bloxx Terminal 4C (Connection of current signals and current
   sensors - Q.bloxx A103 and A108)
- QES (Q.bloxx extension socket for Q.bloxx setups with Q.gate and
   more than 16 slaves to connect power supply and to switch local bus
   UART1/UART2)

 

 

e.bloxx Terminal Blocks

- e.bloxx Terminal CJC (Cold junction compensation for thermocouples -
   e.bloxx A1 and A4)
- e.bloxx Terminal B14-120 (Connection of single strain gauges 120 Ω -
   e.bloxx A6)
- e.bloxx Terminal B14-350 (Connection of single strain gauges 350 Ω -
   e.bloxx A6)
- e.bloxx Terminal B14-700 (Connection of single strain gauges 700 Ω)
- e.bloxx Terminal B14-D (Connection of single strain gauges 120 Ω and
   350 Ω - e.bloxx A6)
- e.bloxx Terminal 4C (Connection of current signals and current
   sensors - e.bloxx A3)
- e.bloxx Terminal 4ISO (Connection of 4 galvanically isolated inputs -
   e.bloxx D1)

 

 

Accessories for ISM and IDL Modules

ICJ 104

Cold junction compensation for thermocouples (Data logger IDL 100 and IDL 101)

ICJ 108

Cold junction compensation for thermocouples (Measurement modules ISM 111 and ISM 112)